Why Does My Toilet Keep Running?

Are you frustrated with your toilet that just won’t stop running?

You know the sound—that never-ending stream of water that runs continuously and drives up your water bill… and probably drives you nuts in the process.

But why does your toilet keep running and how can the issue be fixed?

We all know how annoying a constantly running toilet can be, not to mention the extra money spent on higher water bills. There are several reasons why a toilet may be stuck in a perpetual flush cycle, all of which can be fixed with a few simple steps.

Let’s explore some of the most common causes of a running toilet and some tips for resolving the problem quickly and easily. We’ll discuss more complex cases where calling in a professional Florida plumber may be necessary to get the job done properly.

Common Causes of a Running Toilet

There are a few common causes of a running toilet that you can look into if you’re experiencing this issue:

  • The flapper isn’t closing properly, so it’s not forming a proper seal and water is leaking.
  • The chain connected to the flapper isn’t set to the correct length or it might be tangled, preventing the flapper from sealing correctly.
  • The float could also be set too high, allowing too much water into the tank, which then overflows into the bowl.

How to Diagnose the Cause of Your Running Toilet

First, it’s important to identify what type of toilet you have. Toilets come in different models and sizes. Some are one-piece models with all parts contained in one unit, while others are two-piece models where the tank and bowl are separate components. Knowing the type of model helps narrow down possible causes.

Next, check for any visible signs of leakage around the base and tank or bowl. If water is on the floor or dripping from any part of the toilet, it may be due to a broken gasket or seal that needs replacing.

If there isn’t any visible leaking, it could be an issue with your water supply line or fill valve assembly. In this case, you may need to adjust the float arm or replace faulty parts in the tank inside your toilet.

By conducting a careful diagnosis, you can determine what needs to be done next to fix your running toilet.

Repairs to Fix the Problem

If you are confident in your DIY skills, you can make some repairs to fix the running toilet.

First, check that the water supply valve is turned on. The valve should be fully open, and you can turn it clockwise with a flathead screwdriver or pliers until it stops. If the valve is already open, try replacing the flapper or flush the valve at the bottom of the tank. This component may have worn down and need to be replaced.

You may also want to check if the float is not blocked or stuck in one position. The float should easily move up and down with gentle pressure from your hand; if it doesn’t, adjust its settings.

When to Call a Professional Plumber

If you’ve already tried the DIY repairs but still have issues with running, it might be time to call a professional plumber to repair your toilet.

In this case, an experienced plumbing service should be able to pinpoint the source of the problem and provide the most effective solution. A professional can often identify underlying causes that are difficult to detect without specialized knowledge or tools.

Additionally, a licensed plumber may have access to parts unavailable at local stores. Ultimately, if you’re experiencing persistent problems with your toilet, calling a professional is likely your best bet for resolving the issue quickly and safely.

How Much Does It Cost to Repair a Toilet?

The cost of repairing a toilet can vary depending on the type of repair that is needed. If it’s something simple like replacing the flapper valve or adjusting the float, the cost won’t be too high.

However, more complex repairs like replacing a fill valve or repairing a clog might require professional services and would cost more.

What Type of Toilet Should I Buy to Reduce Running Problems?

If you’re dealing with a toilet that won’t stop running, you may be asking yourself what type of toilet to buy in order to avoid similar problems in the future. To make sure you select a toilet that is more reliable and efficient, it’s important to do your research.

One option is a dual-flush toilet. This type of toilet has two flush buttons—one for liquid waste and one for solid waste—so that you can use less water when flushing smaller amounts of waste. Many dual-flush toilets also have special parts which help prevent any leaks or running issues.

Other types of toilets, such as pressure-assisted models, are also designed to reduce running problems by using air pressure to create a powerful flush.

No matter which type you choose, you must ensure your toilet is installed correctly by an experienced plumber who can check the valves and other parts for proper functioning. We’ll help ensure long-term performance and reliability, minimizing the chance of future running issues.

Tired of Your Running Toilet? Contact a Professional Florida Plumber Today!

If your toilet is constantly running, it’s time to take action.

Before you call a plumber, check to see if there is an easy and inexpensive fix. Make sure the flapper valve is not worn out or stuck open and that the chain isn’t too long or tangled.

If these simple solutions don’t work, it might be time to call in the professionals.

For more complicated plumbing jobs, it’s best to call a professional plumber who can quickly diagnose and repair the issue. A plumber can also advise you on how often the toilet should be checked for problems, as well as what type of chemical cleaner you should use if the toilet needs to be unclogged.

Don’t live with your annoying and costly running toilet any longer—contact an experienced Florida plumber today!

Book Now